Clear terms for reliable connections, from first enquiry to final weld.
These Terms & Conditions (“Terms”) apply to your use of this website and to quotations, orders and supplies of products by Amiable Impex, including exothermic welding powder, semi-permanent graphite moulds, exothermic weld joints, copper braided and laminated connectors, brass components, and exothermic welding kits and accessories.
By browsing this website, submitting an enquiry or placing an order, you agree to these Terms. Where a written quotation, order confirmation or contract signed with Amiable Impex contains specific terms, those specific terms will take priority over these general Terms.
Use of This Website
This website provides information about Amiable Impex, our manufacturing facilities, certifications and exothermic welding products. You agree to use it only for lawful purposes and in a way that does not harm the website or other users. In particular, you agree not to:
- Copy, scrape or republish product data, images, joint codes or catalogue content for commercial use without our written permission.
- Attempt to gain unauthorised access to the website, its server or any connected system.
- Submit false, misleading or automated enquiries, or upload any harmful code.
Product Information and Technical Data
We make every effort to keep product descriptions, joint types, mould codes, weld powder sizes, conductor sizes and images accurate. However, website content is for general guidance only. Specifications, dimensions and packaging may change as we continue to improve our products, without prior notice.
Product images may be representative and can differ slightly from the supplied item. The final specification of any order is the one confirmed in our quotation, product data sheet or order acknowledgement. For critical earthing, lightning protection, railway or substation applications, please confirm the joint configuration and weld powder size with our technical team before ordering.
Quotations, Orders and Pricing
- Quotations are valid for the period stated on them. If no period is stated, prices are subject to confirmation at the time of order.
- An order is binding only after Amiable Impex confirms it in writing, by order acknowledgement, proforma invoice or email.
- Unless the quotation states otherwise, prices exclude GST and other applicable taxes, freight, insurance, special packing and installation.
- Prices of copper, brass and other raw materials can vary significantly. We reserve the right to revise unconfirmed quotations to reflect such changes.
- Custom moulds, special joints and non-standard sizes are made to your approved drawing or specification. Once production starts, they cannot be cancelled or returned.
Payment Terms
Payment must be made according to the terms stated in the quotation, proforma invoice or order acknowledgement. For export orders, payment will be made through the method agreed in writing, such as advance remittance or a letter of credit.
Amiable Impex may hold dispatch of goods until payment due before dispatch has been received in full. Delayed payments may affect delivery schedules and future credit terms.
Delivery and Shipping
Delivery and dispatch dates are estimates given in good faith and depend on order confirmation, payment and the availability of materials. We will keep you informed of any expected delay.
For domestic orders, risk passes to the buyer as agreed in the order confirmation. For export orders, delivery, risk and responsibility for freight and insurance follow the Incoterms agreed in writing. Please inspect goods on receipt and report any shortage, transit damage or mismatch to us in writing promptly, with photographs and packing details, so that we can resolve it quickly.
Safe Handling, Storage and Installation
Exothermic welding produces very high temperatures and molten metal. Our products must be handled, stored and used with care:
- Welding should be carried out only by trained personnel wearing suitable protective equipment, including safety glasses, heat-resistant gloves and closed footwear.
- Always follow the instruction sheet supplied with the product, and use the weld powder size specified for the mould and conductor combination.
- Graphite moulds, conductors and the work area must be clean and completely dry. Moisture can cause spatter, porous welds and personal injury.
- Store weld powder in its sealed container in a cool, dry place, away from heat, open flames and ignition sources, and out of reach of unauthorised persons.
- Keep flammable materials away from the weld area and do not touch the mould or the weld until it has cooled.
Amiable Impex is not responsible for injury, loss or damage caused by failure to follow these instructions or recognised safety practices.
Quality and Warranty
Our products are manufactured and tested at our own facilities under documented quality checks. We warrant that products will be free from manufacturing defects at the time of supply and will conform to the specifications confirmed in the order.
Graphite moulds are semi-permanent and wear with use. Their working life depends on handling, cleaning, operating conditions and the number of welds made, so normal wear is not a defect. The warranty does not cover damage caused by misuse, incorrect installation, use of a weld powder or mould not intended for the joint, moisture, unauthorised modification, or improper storage.
If a product is found defective, our responsibility is limited to repairing, replacing or crediting the defective item after inspection and confirmation by our quality team.
Returns and Cancellations
Standard products may be returned only with our prior written approval, in their original, unused and undamaged condition. For safety reasons, opened weld powder containers cannot be returned. Custom-made moulds and special joints cannot be cancelled once production has started. Any approved return may be subject to handling and freight charges.
Limitation of Liability
To the extent permitted by law, the total liability of Amiable Impex in connection with any order will not exceed the price paid for the products concerned. Amiable Impex will not be liable for indirect or consequential losses, including loss of profit, loss of production, project delay, or third-party claims.
Website information is provided “as is”. We do not guarantee that the website will always be available, uninterrupted or free from errors.
Intellectual Property
All content on this website, including text, product photographs, technical illustrations, joint codes, catalogue material, videos, and the AMIABLE name, logo and associated product brands, belongs to Amiable Impex or is used with permission. You may view and download content for your own reference when evaluating our products. Any other use, reproduction or distribution requires our prior written consent.
Third-Party Links and Videos
This website may include links to external websites and embedded videos from services such as YouTube and LinkedIn. We are not responsible for the content, availability or privacy practices of these third-party services. Your use of them is subject to their own terms.
Force Majeure
Amiable Impex will not be liable for any delay or failure to perform caused by events beyond our reasonable control. These include natural disasters, epidemics, fire, strikes, government action, shortage of raw materials, transport disruption, or port and customs delays.
Governing Law and Jurisdiction
These Terms are governed by the laws of India. Any dispute arising from the use of this website or the supply of our products will be subject to the exclusive jurisdiction of the competent courts in Mumbai, Maharashtra, India.
Changes to These Terms
We may update these Terms from time to time. The revised version will be published on this page with an updated “Last updated” date. If you continue to use the website or place orders after an update, you accept the revised Terms.
Contact Us
If you have any question about these Terms, a quotation or an order, please contact our sales and CRM team. We are happy to clarify any condition before you place an order.